1/10

HPI Racing Brama 10B RTR 4WD Overview

Zero — Wed, 12 Nov 2008 03:00:00 -0600

All components of the RTR kit

One of the latest releases from HPI Racing is the Brama 10B RTR 4WD buggy. This 1/10th scale is designed for low maintenance and has a good price for a 1/10th-scale 4WD. Unlike Hot Bodies, which is the racing division for HPI Racing, this car is more for the novice or sportsman as an entry-level 4WD RC car. It claims good durability, but has extensive use of mostly nylon/composite plastic components. Some seem very durable, but this car probably would need some upgrades for serious off-road competitive racing. For fun in the neighborhood and just getting started, it looks like a great choice and has some great features.

Tough Nylon Front Bumper

HPI Racing Brama 10B RTR 4WD 1/10th scale buggy is a sharp looking RC vehicle. It has some nice features for an entry level 4WD buggy. Based on the E10 chassis, this vehicle should have great handling characteristics. The video on the HPI Racing website shows the vehicle handling nicely and taking curbs and jumps with ease. Being a RTR, you just need to install the AA batteries in the transmitter, charge the vehicle's battery and your ready to run. One feature I really like, is the enclosed 4WD drive shaft, as they claim it helps protect from rocks and loose dirt getting into the drive train and slowing you down. This will keep your car running great in the harshest conditions. It has oil-filled shocks, ball bearings in the drivetrain, a nice tub chassis, a double wishbone suspension, good shock adjust abilities and much more. With a low street price, this should be a great buggy to get started in 1/10th scale 4WD.

Shaft Driven 4WD

For more information, check out the HPI website.

Team Associated TC4 RTR Touring Car Overview

fastie — Fri, 17 Oct 2008 03:00:00 -0500

Team Associated TC4 RTR Touring Car

Some critical characteristics to an excellent road racing car is weight-distribution for good balance and handling, excellent power to weight ratio for quick acceleration, and an efficient drive train system for getting good range for sustained performance. Wait, we are talking about RC cars right? Well, even in RC racing, these are some key characteristics to winning races and the Team Associated TC4 RTR Touring Car comes well prepared for competitive RC racing. It has some of these race winning design features such as an efficient shaft drive system, good weight distribution of the motor versus the battery pack and excellent use of graphite components for low weight for good acceleration, but the strength and stiffness needed for good handling.

Reedy Radon 17-turn motor

Built to improve on the race winning design of the TC3 chasis, the TC4 provides some nice design features to give you a competitive edge in your touring races. Looking at the layout of the components on the chasis, Team Associated has thought about the centerline balance for good roll characteristics of the car as it transitions through the turns quickly. Having better balance makes the car easier to tune and the oil-filled shocks help dampen the motions on your most challenging tracks. More grip from good tuning, equals better power to the tires and the on-board Reedy Motor provides good power to the driveshaft 4WD system. Also, included with the car is a LRP digital speed control, Team Associated XP2 Radio system installed, and many factory team parts as well. All that is needed is a 6 cell battery pack and charger to get your model on the track. One downside is that in the configuration as shown, this model is not set-up for using LiPo battery packs. Also, as of this post Associated also has a TC5 model in kit form which is worth considering. But, for RTR action the TC4 is tough to beat and will get the beginner out racing in no time.

Specifications:

Team Associated TC4 RTR Touring Car chassis

Scale: 1:10
Power: Electric
Type: Touring Car
Length: 373mm
Width: 190mm
Weight: 1375g
Wheelbase: 273mm
Internal Gear Ratio: 2.5:1
Drive: 4WD

Features:

Treaded tires mounted on chrome 8-spoke wheels.

Body Painted V-Type Touring Car (190mm)
Electrical Motor, speed control, radio system
Shocks Composite-body VCS
Differential Carbide-ball Associated differential
Wheels & tires 8-spoke chrome wheels (standard 12mm hex) & treaded tires
Driveshafts Composite CVDs
Turnbuckles Steel
Ball bearings shielded bearings

See Team Associated's website for all the details.

Team Losi 1/10th Scale Grappler Body

Sean — Fri, 04 Jan 2008 04:41:18 -0600

Team Losi is ripping into the rock crawling scene with their all new 1/10th scale Grappler Rock Crawler Body! For you rock crawlin' guys out there looking for a purpose made, 1/10th scale 2.2 crawler body, this is definitely for you. Better yet, for all you Pro guys, the body is USRCCA legal for ALL 1/10th scale rock crawling classes. What else could possibly make this body better? Its made from tough .40" polycarbonate for that extra protection, and comes with a 5 color decal sheet and pre-cut window masks. Not only that, but it fits most popular 2.2 scale rock crawlers, such as the Axial AX-10 Scorpion, Bender SW2 & SW3, Gatekeepers Design GC1 and Reign K2-3L.